Maintenance And Service; Maintenance And Cleaning - Bosch XEO Originalbetriebsanleitung

OBJ_BUCH-377-007.book Page 22 Tuesday, August 9, 2011 10:13 AM
22 | English
This allows for precise guiding of the machine alongside the cutting line marked
on the material.
Cutting with the Cutting Adapter (Accessory) (see figures C1–C2)
The cutting adapter 12 enables you, as an example, to cut flooring alongside a
wall.
After cutting, the flooring will have the optimal clearance of 3–5 mm to the wall
(expansion joint).
– Firstly, cut the flooring 5–8 cm above the desired edge.
– To fasten the cutting adapter 12 to the machine, insert the guide edge 5 to the
stop into the opening of the cutting adapter.
– Position the cutting adapter flush between wall and floor.
The imprinted arrow must face towards the floor ("Floor").
– Switch the machine on and guide the cutting adapter slowly along-
side the wall.
Note: Take care that the cutting adapter is always guided flush to the wall and the
floor, and that the flooring is always positioned firmly against the cutting adapt-
er. Otherwise, precise cutting to length is not possible.

Maintenance and Service

Maintenance and Cleaning

Warning! Prior to any maintenance and cleaning, switch the machine off
and secure the lock-off button 2.
For safe and proper working, always keep the machine clean.
While cutting, material residue can accumulate under the blade guard.
– Clean the blade guard 3 regularly using a brush or lightly moistened cloth.
If the machine should fail despite the care taken in manufacturing and testing
procedures, repair should be carried out by an after-sales service centre for
Bosch power tools.
In all correspondence and spare parts order, please always include the 10-digit
article number given on the type plate of the machine.
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concerning maintenance and
repair of your product as well as spare parts. Exploded views and information on
spare parts can also be found under: www.bosch-pt.com
Our customer service representatives can answer your questions concerning
possible applications and adjustment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
1 609 929 W36 | (9.8.11)
Floor
Bosch Power Tools