Herunterladen Inhalt Inhalt Diese Seite drucken

Configuration And Set-Up; General; Overview - Telecom Behnke 50-2001 Anleitung

Kapazitiver tastwahlblock
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Instructions Capacitive Keypad
GB
GB

Configuration and set-up

configuration and set-up
4.

4.1. General

Enter Set-up mode
To enter the configurations menu please press
the "i" key three times (in quick succession).
Then the keypad will flash three times.
Exit Set-up mode
After 8 seconds of inactivity, the Set-up mode
will be automatically terminated. All changes to
settings will be saved. A Reset also terminates
the Set-up mode. The display will flash three
times to indicate the exit from the Set-up mode.
Code
Configurations
00
Reset
01
Illumination
02
Optic Signal
03
Brightness
04
Wipe
20
Sensitivity
21
Debounce time
22
Burst count
23
Signal duration for key transmis-
sion
99
Readout
22

4.2. Overview

The following settings may be changed in
Set-up mode. For more detailed information
on configurations step 22 (burst count) and
23 (activation interval for key transmission),
please see Chapter 6 "Error Correction".
Configurations values
Terminate reset with #
0: off; 1: on
0: off; 1: on
0, 1, .... 9
0: off; 1: on
5, 6, ... 9
3, 4, ... 9
1, 2, ... 9
3, 4, ... 9
Enter the configurations code and
the set value will be indicated by
corresponding display flashing
Default
-
1
1
9
1
7
4
6
3
www.behnke-online.com

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis