Background Illumination - Telecom Behnke 50-2001 Anleitung

background illumination

3.
The Capacitive Keypad's background illumination
provides an optic signal while setting-up and
when activating a key.
Set-up keypad
▸ Activating a key
During set-up
▸
Entering and exiting set-up mode
▸
Wrong entry in set-up mode
▸ Correct entry in set-up mode
In case the keypad is not connected to a door
intercom, it will constantly flash. This error
message is also given if the door intercom is
not connected to an a/b line.
Programming steps for setting up background
illumination, the optic signal for display flas-
hing after key activation and other settings will
be explained in the following section.
www.behnke-online.com
Instructions Capacitive Keypad
Background illumination
> single flashing
> triple flashing
> double flashing
> single flashing
GB
21