Bosch Indego 850 Originalbetriebsanleitung Seite 41

OBJ_BUCH-1573-008.book Page 41 Tuesday, October 27, 2015 10:35 AM
Edit Slots
00 04 08 12 16 20
M
T
W
T
Select the mowing day with the up/down cursors, e. g. "M".
Set up a start time slot for the selected day with the right/left
cursors.
Confirm the start time by pressing the bottom right arrow. Set
up an end time for the slot with the right/left cursors. Confirm
the end time by pressing the bottom right arrow.
The machine will work within a slot unless the battery needs
charging. If the lawn area has been completed before the end
of a time slot the machine will return to the docking station.
The programmed slot is shown on a schedule.
Edit Slots
00 04 08 12 16 20
l
M
T
l
W
T
Set up all additionally required mowing days and confirm your
personal "CUSTOM 1" mowing schedule by pressing the bot-
tom left arrow (return).
To delete a slot move the cursor to the corresponding time
and press the bin icon which will appear in the bottom right
corner.
Bosch Power Tools
21:00
A tick
The machine will start mowing as soon as day and start time of
slot 1 is reached.
Note: Set up different schedules for seasonal growing condi-
tions in spring, summer and autumn. Observe the growth of
the grass and adjust your schedule if required.
Mowing
 Do not let children ride the machine.
 Press manual stop button before lifting. Always lift the
machine at its handle.
Height of cut: The height of cut for the Indego can be adjusted
between 20 mm and 60 mm (see figure 19). The height of cut
l
dial offers 10 separate settings (approx. 20 mm, 24 mm,
29 mm, 33 mm, 38 mm, 42 mm, 47 mm, 51 mm, 56 mm and
60 mm).
Note: The Indego's cutting system is designed to cut small
lengths of grass (3–5 mm) so that the clippings can mulch
down and fertilise the lawn.
21:00
Note: For the first 3 weeks of usage set the height of cut be-
tween 5 and MAX to prevent the perimeter wire being cut. Af-
ter 3 weeks the wire will be covered by the lawn.
For best mowing results, set up a frequent mowing schedule
for longer lasting battery and for preventing debris on the
lawn.
Once mowing has started:
– in the "Manual" mode, the machine operates until the
lawn area has been cut or until the manual stop button is
pressed. It only pauses mowing for charging.
– in the programmable "Custom" mode, the machine oper-
ates continuously within a slot. It only pauses mowing for
charging. To stop mowing before the machine has finished
a slot, press the manual stop button. If the lawn area has
been completed before the end of a time slot the machine
will return to the docking station.
Select Daily Timer
MANUAL
Info CUSTOM 1
CUSTOM 2
CUSTOM 3
Edit CUSTOM 4
CUSTOM 5
Back
will appear next to the saved mode.
F 016 L81 517 | (27.10.15)
English | 41
Select