Initial Setup - Bosch Indego 850 Originalbetriebsanleitung

OBJ_BUCH-1573-008.book Page 38 Tuesday, October 27, 2015 10:35 AM
38 | English
lines to and from these zones may not cross but the wire
should be touching. (see figure 8)
Note: Approximately 20 cm of lawn
20-25cm
around the fixed object and around the
edge of the lawn will not be mown.
Fix the wire with the first peg next to the docking station, ten-
sion and fix with pegs at a distance of approx. 50 cm. (see
figure 8)
Continue the loop and bring the wire to the back of the dock-
ing station and inline with the other end of the wire. Fix the
second end of the wire also with the peg. Perimeter wire and
peg should be installed inline. Shorten the wire, cut off insula-
tion carefully and connect the wire to the left hand (black) ter-
minal. (see figure 11)
Clip on the protective cover of the docking station. (see
figure 12)
Note: If extra perimeter wire is required this can be added us-
ing one connector. (see figure 9)
The wire can be extended up to the maximum allowed length
of 450 m.
Note: If verticutting or raking is intended avoid the perimeter
wire.
Install the power supply in a cool, dry environment. Connect it
with the docking station and an indoor mains socket. (see
figure 13)
Check the indicator on the docking station (see figure 14):
– Indicator lights up continuously green, if the output volt-
age of the power supply is available and the perimeter wire
is not interrupted.
– Indicator does not light up when the output voltage of the
power supply is not available.

Initial Setup

Plug the isolator key into the machine and put it into the dock-
ing station for charging. (see figures 15 – 17)
The welcome screen appears and shows following symbols:
Indego
Symbol Meaning
Multifunctional buttons, left
Battery capacity
* Mower connected to GSM network
* Waiting to connect to the GSM network
* Mower connected to server
* Waiting to connect to the server
F 016 L81 517 | (27.10.15)
Symbol Meaning
Title of Menu/Submenu
Display with dialog screens
Time
Multifunctional buttons, right
* Indego ... Connect
The buttons are multifunctional. The meaning depends on the
individual menu function and is explained on the screen.
The buttons next to the arrow symbols
gate up or down through the menu options. The buttons next
to the arrow symbols or allow to go right or left through
the menu options.
The display will change to the next screen as soon as any op-
tion is selected and confirmed.
Installation
First press the button next to "Language choice". The "Set
Language" screen appears and shows the following.
Set Language
English
Deutsch
Dansk
Svenska
Norsk
Suomi
Select one of the Language options and confirm with "Save".
Select Region
Europe – South
Europe – West
Europe – North
Europe – UK
Europe – East
Cancel
Select the region where the Indego is located and confirm
with "Save".
This information will be used by the e-compass in the robotic
lawnmower for a better performance of the Indego.
or allow to navi-
Save
Save
Bosch Power Tools