Global/ Administrative Blocking Of Remote Assigning Of Remote Controls - dtm MAX II Betriebsanleitung

3
1 2
4
REMOTE
Fig. 18. Blocking of remote assigning
of remotes.

2.5.Global/ administrative blocking of remote assigning of remote controls

The bc option is used to set the blockade of remote assigning of remote controls.
There are three possibilities to set the blockade:
- global lock '
- administrative lock on
receiver apart from the remote controls on the first three positions in receiver's
memory. Using the remote control assigned on the 001-003 position enables
remote copying, the rest of the remotes is deprived of this possibility.
- no lock
'off'
control remotely.
To set one of the blocking function (fig.18) it is necessary to:
- press A button of the receiver, PP appears on the display, from the level of main
A
menu choose with up/down buttons 'bc' option, confirm with A button of the
receiver,
- set the necessary option with up-down buttons: : 'oF' for lack of blocking 'on' for
turning on the blockade, 'bA' for administrative blockade, confirm the choice
withA button of the receiver.
- confirm the changes withA button of the receiver and exit the function settings.
Withdrawing from the changes takes place after pressing B button on the
receiver.
The blockade will also be active for all remotes that will be registered in the
future.
Turning on the global blocking of remote assigning is superior with
individual settings of the blockade in remote controls.
on' – sets the blockade for all remotes in receiver's memory
– sets the blockade for all remotes assigned to the
'bA'
- all remotes in receiver's memory allow to assign the new remote
68