Blocking Of Remote Assigning Of Remote Controls - dtm MAX II Betriebsanleitung

3
1
2
4
REMOTE
A
A
back to bc
Fig. 12. Blocking of remote assigning
of remote controls.

2.2.2.3. Blocking of remote assigning of remote controls

The bc function described here concerns individual blockade for a particular remote.
To change the blockade for all remotes it is necessary to use global blocking of remote
assigning on the level of main menu (see pt.2.5)
To switch on/off the blocking of remote assigning of remote controls (fig.12) it is
necessary to:
- declare the remote control for edition (pt. 2.2.2)
- choose with up/down buttons of the remote bc sub-option and confirm the choice
withA button of the receiver
- switch on/off the blockade with up/down buttons of the remote: on (blockade on)
or off (blockade off), confirm the choice withA button of the receiver
Withdrawing from the changes takes place after pressing B button on the
receiver.
62