Nissei DSK-1011 Bedienungsanleitung Seite 12

Blood pressure is changing 24 hours a day in relation with mental and physical
conditions. Eating, drinking, smoking, exercising or bathing will alter blood pressure.
Blood pressure will be also influenced by mental condition such as feeling tensed or
relieved and health condition It is important to know the tendency of blood pressure by
making measurement regularly. Make your own rules including conditions and time to
make measurement and take blood pressure everyday.
[ ] symbol is displayed again in the course of inflation and deflation and
inflation of the cuff are repeated.
When the initial pressure was too high for blood pressure to be taken or if you move
or strain your arm or hand, the cuff is inflated again. Deflation and inflation of the
cuff are repeated until blood pressure is taken. This does not indicate any problem
or malfunction of the monitor. Do not move or speak during measurement.
[Err 300] is displayed.
Over pressure: blood pressure could not be taken due to moving or speaking
although the cuff was inflated to the maximum pressure. Do not move or speak
during measurement.
[Err -1] is displayed.
Blood pressure could not be taken due to moving or speaking. Do not move or
speak during measurement.
[Err -2] is displayed.
The cuff is not securely connected to the monitor. Secure the air connector.
The cuff is not wrapped appropriately. Reconfirm how to put the cuff on
your arm.
[ ] is displayed.
Batteries are weak. Replace all batteries with new ones.
Nothing is displayed.
???
Batteries are depleted. Replace all batteries with new ones.
Batteries are inserted incorrectly. Reinsert the batteries correctly.
Battery terminals are not clean. Clean the terminals with dry cloth.
AC adaptor is not connected. Connect AC adaptor.
Touching the keys with tip of finger or nail is touching the key. Touch the key
with the plane of your finger.
Clock is not displayed.
???
The clock is inactivated. NOTE: Clock is inactivated when batteries and/or AC
adaptor are/is removed. Adjust date and time and activate the clock.
Measurement date and time are displayed with [
???
The clock is not activated. Adjust date and time and activate the clock.
Measurement was taken before the clock was activated. Measurement date
and time cannot be saved without clock being activated.
[0 0] is displayed.
"START/STOP" KEY was being touched when batteries are being installed or
when AC adaptor is being plugged in. Turn off the monitor once with
"START/STOP" KEY.
Cuff end is loosened.
Put the cuff with its hook
and loop fastener side
down. Put the cuff end
through the metal ring.
Fold back the cuff at the
metal ring.
-12-
] and [ ].
metal ring
hook and loop fastener