Pulse Rate - Nissei DSK-1011 Bedienungsanleitung

Air is released from the cuff and measured
values are displayed as measurement
completes.
Refer to page 3 for [ ].
Refer to page 4 for [ ].
Refer to page 12 for "Err" display.
4
SELECT MEMORY BANK TO SAVE THE MEASUREMENT RESULT.
MEMORY SYMBOL is displayed below
MEMORY KEY.
Touching MEMORY KEY will switch the
bank.
V I E W I N G T H E S A V E D R E A D I N G S ( M E M O R Y F U N C T I O N )
Turn off the monitor once with "START/STOP" KEY when the results are displayed
after a measurement.
Refer to page 4 for memory function.
To delete readings, refer to page 11.
1 TOUCH MEMORY KEY.

PULSE RATE

TIME
MEMORY
MARK
SYSTOLIC
DIASTOLIC
WHO
CLASSIFICATION
SYMBOL
PULSE PRESSURE
1 2
MEMORY MARK
-10-
Readings are automatically saved in the bank, either MEMORY [1] or [2], selected
when the monitor is turned off after measurement. Make sure to confirm the bank
selected after a measurement.
Refer to page 4 for memory function.
5
TURN OFF THE MONITOR.
Touch "START/STOP" KEY.
The monitor will be turned off. Even if you do not turn off the monitor, it turns off
automatically after 3 minutes.
Do not execute repeated measurements for congestion of blood
could result in false measurement. Let your arm rest for at least 5
minutes.
Touch MEMORY KEY [1] to review readings
saved in the memory bank [1] and MEMORY KEY
[2] to review those in the bank [2].
The average of the saved readings are displayed.
Note: Average will not be displayed unless there are
two or more readings saved.
: Average
NUMBER OF
SAVED RESULTS