Maintenance And Cleaning; Troubleshooting - VOLTCRAFT SLS-150-12 Bedienungsanleitung

10. MaINTENaNCE aND CLEaNINg

The product does not require any maintenance. You should never take it apart.
The product should only be repaired by a specialist or specialist workshop or it may be dam-
aged. Furthermore, the CE approval and the guarantee/warranty will expire.
Before cleaning, switch off the product and disconnect it from the voltage/current supply. Then
disconnect any connected consumer as well.
Only clean the product with a soft, clean, dry and lint-free cloth. Never use any cleaning
agents, since this might damage the surface of the casing and label.
Dust can be removed using a clean, soft brush and a vacuum cleaner.

11. TROUBLESHOOTINg

Inverter does not work, LED in the cigarette lighter plug is not lit.
• For most vehicles, voltage is only applied to the cigarette lighter socket when the ignition of
the vehicle is switched on.
• The cigarette lighter plug is not completely inserted into the socket or the plug does not
make contact. Pull the cigarette lighter plug from the cigarette lighter socket and plug it back
in.
• The fuse in the cigarette lighter plug has tripped. Check the fuse and replace it if required.
• The fuse in the cigarette lighter socket in the vehicle has tripped. Check the fuse and replace
it if required.
• The polarity of the cigarette lighter socket does not match that of the cigarette lighter plug of
the inverter.
The middle contact of the cigarette lighter plug is the plus pole (+), the outer contact is the
minus pole (-).
37