Technical Data - VOLTCRAFT SLS-150-12 Bedienungsanleitung

13. TECHNICaL DaTa

Rated input voltage ............................12 v/DC
Input voltage range ............................11,0 - 15,4 v/DC
Output voltage ....................................230 v/AC (±5%), 50 Hz (±3%)
Signal output form ..............................True sine wave (<3% THD)
Permanent output ...............................150 W
Peak output .......................................250 W (short-term, max. 0.5 s)
Effectiveness at rated load .................85%
Power intake without load ...................<0.5 A
Cooling ............................................... Installed fan (starts up automatically with the inverter on
Input.................................................... Cigarette lighter plug; the middle contact is the plus pole
Outputs ............................................... 1x Euro socket (230 v/AC, 50 Hz)
Fuse .................................................... Microfuse 6.3 x 32 mm (Ø x L), 20 A, 250 v, quick-acting
Undervoltage alarm ...........................Yes, at input voltage <11.0 v/DC
Undervoltage deactivation .................Yes, at input voltage <10.7 v/DC
Overload protection ............................yes
Overtemperature protection ................yes
Protection against wrong polarity .......yes
Short-circuit protection ........................yes
Operating conditions ........................... Temperature: 0 °C to +40 °C, humidity 0% to 85%
Dimensions .........................................155 x 88 x 35 mm (L x W x H)
Cable length .......................................approx. 800 mm
Weight ................................................435 g
when cooling is required)
(+), the outer contact is the minus pole (-).
1x USB (5 v/DC, max. 2 A)
tripping characteristics
relative, non-condensing
39