Herunterladen Inhalt Inhalt Diese Seite drucken

Frost Protection; Faults - Kärcher BR 30/4 C Bp Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für BR 30/4 C Bp:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Replacing the brush roller
 Remove the fresh water reservoir.
 Remove the waste water tank.
 Lay the device on the reverse.
 Press the release button for the brush
roller and swivel the brush roller toward
the bottom and pull it off the driver.
 Place the new brush roller on the driver
and lock into place on the opposite side.

Frost protection

In case of danger of frost:
 Empty the fresh and dirt water reser-
voirs.
 Store the appliance in a frost-protected
room.
Fault
Appliance cannot be
started
Insufficient water
quantity
Fresh water reservoir
drips when refilled
Remedy
Check whether at least one charged battery is present in the com-
partment and make sure it is inserted all the way.
Battery indicator lamps are blinking orange: Check if foreign mat-
ters are blocking the brush roller; remove foreign matter if required.
The indicator lamps blink orange and red: Call Customer Service.
Check fresh water level, refill tank if necessary.
Open the lock of the fresh water reservoir. If a vacuum is detected
when the tank is opened, clean the ventilation valve in the lock of
the fresh water reservoir.
Clean the water distributor (see chapter "Cleaning the water distrib-
utor").
Remove the fresh water tanke and check the sieve for contamina-
tion. If necessary, remove the sieve and clean it.
Pull off the valve with filter on the fresh water reservoir (Fig. 6, see
inside front cover) and rinse in lukewarm water.
Clean the sieve in the cleaning head.
Pull off the valve with filter on the fresh water reservoir (Fig. 6, see
inside front cover) and rinse in lukewarm water.
EN
WARNING
Risk of injury if the machine is left running
in an unattended state.
Turn the appliance off before carrying out
any tasks on the machine.
ATTENTION
Risk of damage to the device on account of
water leakage. Empty the waste water tank
and the fresh water tank prior to performing
maintenance tasks on the device.
In case of faults that cannot be remedied
using the table below please contact the
customer service.
– 5

Faults

15

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis