Herunterladen Inhalt Inhalt Diese Seite drucken

Kärcher BR 30/4 C Bp Bedienungsanleitung Seite 16

Vorschau ausblenden Andere Handbücher für BR 30/4 C Bp:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Insufficient vacuum
performance
Insufficient cleaning
result
Brush does not turn
Creaking sound, brush
does not turn
Clean water distributor
 Take out the brush roller.
 Pull the water distribution bar out of the
brush tunnel (Fig. 7, see inside front
cover).
 Clean the irrigation channel and the
opening in the water distribution bar un-
der running water.
Clean suction tube
 Remove the fresh water reservoir from
the appliance.
 Swivel support bow downward and re-
move the waste water tank.
 Pull the suction tube connection out to-
ward the rear of the appliance and swiv-
el out both ends of the suction tube (Fig.
8, see inside front cover).
The suction tube is separated and both
ends are accessible for cleaning.
16
Empty the waste water tank.
Lock the waste water reservoir in place on the appliance.
Clean the seals between waste water tank and cover and check for
tightness, replace if required.
Check the seals between the lid of the waste water tank and the ap-
pliance. Contact Customer Service if the seals are damaged.
Check that all vacuum bars are locked into place in the cleaning
head.
Suction bar plugged, clean.
Suction bar worn; exchange the front and rear suctions bars. If both
suction bars are worn, install new suction bars.
Check that both suction tube parts are correctly attached to the suc-
tion tube connection.
Check the suction tube and the suction channel in the cleaning
head for obstruction and remove if necessary (see "Cleaning suc-
tion tube").
Check whether the cable behind the tanks has been routed flat and
whether the included cover is attached.
Check the brush roller for wear, replace if required.
Check if foreign matters are blocking the brush roller; remove for-
eign matter if required.
Slip clutch was triggered. Switch off the appliance, check/clean the
brush roller.
EN
 Pull the vacuum bar off toward the bot-
tom, the suction channel in the cleaning
head is accessible for
cleaning (Fig. 9, see inside front cover).
 Flush the suction hose and the suction
channel with water or pull or push the
obstruction out with a blunt object.
– 6

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis