JVC KY-F1030 Bedienungsanleitung Seite 46

5. Menu screen settings (continued)
MENU (QUICK) screen (continued)
[ ] indicates the factory setting
Item
SHUTTER
SPEED
When
"V.SCAN" is
selected
SPEED
When
"RANDOM" is
selected
GAIN
LEVEL When
"STEP" is
selected
LEVEL When
"V. GAIN" is
selected
FOCUS
ZOOM
E42
Set Value
• When the shutter speed is slower than 1/7.5 s, the following
phenomena may occur.
1) The screen update rate becomes longer in the case of digital output.
3.990s
2) The displayed image will appear intermittently in the case of analog output.
•
3) Time will be required for the auto white, auto iris and ALC operations.
•
If the shutter speed is set slower than 1 s, these operations will
[1/7.501s]
behave as follows.
•
Auto white : Auto white balance function cannot be started.
•
1/5906.836s Auto iris
ALC
1/7.500s
To use a shutter speed slower than 1 s, use with the following settings selected:
•
IRIS MODE : MANUAL
[1/126.134s]
GAIN
•
• There may be shortage of light when the shutter speed is increased. In
•
this case, adjust the iris or sensitivity. Attention should be paid to the pic-
ture quality when the sensitivity is raised since the image becomes coarse.
1/5648.193s
[STEP]
Used to switch the sensitivity mode.
ALC
STEP:
V.GAIN
ALC:
V. GAIN: The sensitivity can be changed in detail with the
[0dB]
+6dB
+12dB
[0dB]
+0.2dB
+0.4dB
•
•
+12dB
Selects the focus position.
0
Increasing the value:
1
Decreasing the value: Focus nearby
•
[128]
•
255
0 Selects the zoom position.
Increasing the value:
1
Decreasing the value: Toward wide-angle
•
[128]
•
255
MEMO
( page E23 White balance adjustment)
: Stops at the iris value at that time.
: Stops at the sensitivity at that time.
: STEP or V.GAIN
The sensitivity can be changed with the "LEVEL"
item.
The sensitivity is automatically changed in ac-
cordance with ambient brightness.
"LEVEL" item.
Contents
Focus far away
Toward telephoto