JVC KY-F1030 Bedienungsanleitung Seite 31

When the shutter mode is "RANDOM"
• CCD accumulation is performed in sync with the trigger input, and this period is output as the
FLASH signal.
• At the same shutter speeds the delay from the trigger input to the FLASH output is almost
uniform as shown in Table A below. Also, the pulse width of the FLASH output differs with the
shutter speed.
• The trigger input interval is restricted as shown in Table B. Do not input at a shorter
interval than the minimum interval shown in the table.
A
Shutter
Delay [ms]
speed
0.203 ± 0.063
1/8s
0.203 ± 0.063
1/15s
0.203 ± 0.063
1/30s
0.203 ± 0.063
1/60s
0.203 ± 0.063
1/125s
2.953 ± 0.063
1/250s
4.953 ± 0.063
1/500s
5.953 ± 0.063
1/1000s
6.453 ± 0.063
1/2000s
* In the following situations, the FLASH signal is continuously generated in sync with the CCD
regardless of the external trigger.
● When [SHUTTER] on the EXPOSURE screen is set to "EEI".
● When [GAIN] on the EXPOSURE screen is set to "ALC".
● When [IRIS MODE] on the EXPOSURE screen is set to "AUTO".
● While AW (Auto White) is operating.
MEMO
• In the condition where the shutter mode is RANDOM, the image quality may deteriorate at the time of
FREEZE as noise may be applied or white spots may appear.
FREEZE
B
Minimum
VD (internal)
trigger
EXP (CCD
interval [ms]
accumulation
period)
395
337
FLASH
304
287
ANALOG
278
OUT
277
277
277
277
WEN
B
A
E27