WimTec SanTec OCEAN U8 Montage- Und Bedienungsanleitung Seite 15

Commissioning
1.
Screw on electronic module.
2. Adjust flushing time
pressure and flushing quantity. (1 – 15 s adjustable / 5 s pre-adjusted)
3.
As function control after start of operation the red Led is shining for 1 min at
user recognition.
4.
Mount front plate – make function test.
5. Adjust active range
6.
Fix front plate.
7.
SanTec OCEAN U8 is ready for operation.
Function
Minimum stay time:
4 s
OCEAN U8
if necessary. Save water! Adjust flushing time according to flow
if necessary (30 – 70 cm adjustable / 50 cm pre-adjusted)
Intelligent pre-flushing:
1 s, if urinal was not used for
more than 5 min
Adjustable main flushing:
from 1 – 15 s
Urinal control SanTec OCEAN U8
EN
Dry-out protection:
at 24 h non-use
15