Technical Specifications - WimTec Santec Proof P6 Montage- Und Bedienungsanleitung

EN

Technical specifications

12 V external supply:
Operating voltage:
Power consumption:
Further technical specifications:
Magnetic valve:
Far active range:
Close-Active range:
Flushing stop:
Stagnation rinse:
Cleaning stopp:
Flow rate:
Static pressure:
Water temperature:
Flow rate:
Water inlet:
Material:
Temperature adjustment: Thermostat with hot-water barrier (not frost resistant)
Noise class:
20 Shower control
PROOF P6 with thermal disinfection
via power supply 230 V 50 Hz / 12 V=
Art.No. 117 899 - power supply for one control unit
Art.No. 113 792 - power supply for up to 5 control units
max. 3 W
cartridge 6 V
60 cm
1 - 3 cm
set to 10 min by default (configurable from 10 s - 10 min,
self-closing function: 10 s - 60 s)
for 10 s when not in use for 3–48 h (configurable, set to 48 h by default)
10 min (switchable)
0,05 - 0,6 MPa (0,5 - 6 bar)
max. 0,8 MPa (8 bar)
max. 70 °C (max. 80 °C for max. 10 min)
9 l/min at 0,3 MPa (3 bar)
R 1/2" IG
Panel: Aluminium anodized, fittings: chrome
I
SanTec OCEAN P6 with thermal disinfection