A) Heat Regulation - Solamagic S1 Montage- Und Gebrauchsanleitung

a) Heat regulation:

Switching on/off:
Short-term heating:
Heating level:
Memory function:
Timed switch off:
Synchronisation:
08/2016
Brief pressing of the programmed wireless channel button
on the hand-held transmitter switches the connected radi-
ant heater on or off.
Double-clicking the programmed wireless channel key
switches the radiant heater on for 15 minutes and then
automatically switches it off again.
Extended pressing of the programmed key on the hand-
held transmitter switches the heat output up and down
between three levels (33, 66 and 100%).
Upon switching back on, a short press of the key recalls
the last heating level.
If a timed switch-off has been activated in the program-
ming, the radiant heater always switches off automatically
after the specified time. The radiant heater signals as fol-
lows after the activating the set residual run time:
Signal duration 2s -
Signal duration 4s -
Signal duration 6s -
If multiple radiant heaters are controlled using the same
hand-held transmitter button, faults in the wireless trans-
mission path can result in different states. For synchroni-
sation, use the function „Heating level" to initially set all
radiant heaters in switched-on state. Then switch off all
receivers by a briefly pressing the key. The „Heating level"
function can now be used to simultaneously set again all
the actuated receivers.
26
30 minutes residual run time
60 minutes residual run time
90 minutes residual run time