Technical Data - AKG P170 Bedienungsanleitung

Technical data

7 Technical data
Type:
Polar pattern:
Sensitivity:
Frequency response:
Electrical impedance:
Recommended load impedance:
Equivalent noise level to IEC 60268-4:
Signal to noise:
Max. SPL for 0.5% THD:
Temperature range:
Phantom powering:
Current consumption:
Connector:
Diameter:
Length:
Net weight:
Preattenuation pad:
Frequency Response
This product corresponds to the standards stated in the Declaration of Conformity. You can request the
Declaration of Conformity by e-mail from sales@akg.com.
20
1/2" diaphragm, true condenser pressure-gradient microphone
cardioid
15 mV/Pa (-36.5 dBV)
20 Hz to 20 kHz
(see frequency response trace)
≤ 200 ohms
≥ 1000 ohms
19 dB(A)
75 dB(A) re 1 Pa
135 / 155 dB SPL (0 / -20 dB)
-10 °C to +60 °C (14 °F - 140 °F)
48 V ±4 V to IEC 61938
≤ 3 mA
3-pin XLR (pin 2 hot)
22 mm (0.86 in.)
160 mm (6.3 in.)
130 g (4.59 oz)
-20 dB
Polar Diagram
P170