Technical Data; Microphone; Remote Control Unit - AKG P820 Bedienungsanleitung

Technical data

7 Technical data

Microphone

Type:
Polar pattern:
Sensitivity:
Frequency response:
Electrical impedance:
Recommended load impedance:
Equivalent noise level to IEC 60268-4:
Signal to noise:
Max. SPL for 0.5% THD:
Temperature range:
Phantom powering:
Connector:
Diameter:
Length:
Net weight:
Bass cut pad:
Preattenuation pad:

Remote Control Unit

Audio &control input connector:
Audio output connector:
Polar pattern selector:
Bass cut filter switch:
Preattenuation switch:
Power voltage:
Primary fuse:
32
1" dual-diaphragm, tube microphone
9 selectable polar patterns (selectable on remote control unit)
(cardioid) 20 mV/Pa (-34 dBV)
20 Hz to 20 kHz
(see frequency response trace)
≤ 200 ohms
≥ 1000 ohms
16 dB(A)
78 dB(A) re 1 Pa
135 / 155 dB SPL (0 / -20 dB)
-10 °C to +60 °C (14 °F - 140 °F)
via Remote Control Unit only
dedicated 7-pin male XLR
54 mm (2.13 in.)
212 mm (8.3 in.)
765 g (27 oz.)
80 Hz, 12 dB/octave (switchable on Remote Control Unit)
-20 dB (switchable on Remote Control Unit)
dedicated 7-pin female XLR
standard 3-pin male XLR (balanced, pin 2 hot)
9-position detented rotary switch
2-position toggle switch
2-position toggle switch
210-240 VAC or 110-120 VAC, selectable
125 mA / 250 V slow-blow
P820