Service; Storage - Tennant F3 Bedienungsanleitung

EN English

Service

S For repairs, please contact your specialist wholesaler
or one of the service shops.
S You will be expertly and quickly served.
Servicing instructions
The following instructions must always be observed.
S When cleaning and servicing the machine, replacing
parts or when changing over to a different function,
switch off the drive and remove the plug.
The power supply lead must not be damaged by
S
driving over it, crushing, tugging etc.
S Check the power supply lead regularly for signs of
damage.
S The machine must not be used if the power supply
lead is not in perfect condition.
S When using or replacing the power supply or
equipment supply leads, use only those specified by
the manufacturer.
S When replacing the plug- and- socket connectors of
power supply or equipment supply leads, splash
protection and mechanical strength must be assured.
When transporting the machine in lifts, put the
S
shaft/bar in a vertical position so that it cannot catch
on the lift walls.
The shaft/bar is automatically secured against recoil
S
by the patented shaft/bar adjustment unit.
S Only the spray and cleaning agents suitable for the
machine's purpose may be used.
S Never use highly flammable, combustible, toxic,
health- hazardous, corrosive or irritant substances.
Repairs, including the fitting of spray agent lines and
S
hoses, may only be carried out by approved customer
service shops or by specialists in this field who are
familiar with all the relevant safety regulations.

Storage

S Remove brush/pad driver from machine and neatly
coil cord around cord hook and handle.
Store the machine in a dry place and in normal room
S
conditions (not below under 0_C)
6
F3/F3+/F8/F12 9002026 (04- 11)