Storage When Not Using The Product; Troubleshooting; Device Does Not Respond To The Remote Control Commands; Some Buttons Do Not Work Properly - Silvercrest IAN 274301 Bedienungsanleitung Und Serviceinformationen

Please note that this function is not available for macro or
timer mode.

Storage when not using the product

If you will not be using the remote control for a long period
of time, remove the batteries to prevent any leaking.
Store the cleaned device in a dry, cool place.

Troubleshooting

Device does not respond to the remote control commands


Please check that you have selected the correct device with the
remote control.

Point the remote control directly at the device.

Check if the remote control has been programmed with the correct
code for your device.

It is possible that the device is not compatible with programming
using the code list. In this case, please program the remote control
by using the learn function.

The batteries are low or empty. Replace the batteries with new
batteries of the same type. See also the chapter "Inserting the
batteries".

Some buttons do not work properly


It is possible that not all functions of your original remote control
are supported.

The code entered does not support all the functions of your device.
Try to find a code that matches your device better.

Program any buttons that do not work properly using the learn
function.

Before programming a device button using brand code search or
automatic search, please carry out a RESET for this button first. If
this device had previously been programmed using the learn
function, any learned keys would not be overwritten by the new
programming.

The LCD display does not work


The batteries are low or empty. Replace the batteries with new
batteries of the same type. See also the chapter "Inserting the
batteries".
SilverCrest SFB 10.1 C3
English - 33