Before You Start; Important Note On Compatibility; Trademark And Brand Information - Silvercrest IAN 274301 Bedienungsanleitung Und Serviceinformationen

Open the battery compartment on the
back of the remote control by removing
the battery compartment cover in the
direction shown. Insert the batteries with
the correct polarity, as shown in the
diagram. The correct polarity is labelled
on the batteries and inside the battery
compartment.
compartment cover. If the remote control
range declines, replace the batteries with
new batteries of the same type. The device
does not give any indication when the
batteries are running low.

Before you start

The remote control is powered by 2 batteries of type Micro AAA, LR03,
1.5V. They are included in the package.
On delivery, the batteries are already inserted into the battery
compartment.
Exception: If you have purchased your device from the LIDL online shop
or if you have received a replacement for your defective device, first you
have to activate the batteries by removing the plastic strip. Proceed as
follows:
1. Open the battery compartment.
2. Remove the plastic film.

Important note on compatibility

All functions described in these operating instructions are
valid only if the keypad layout of your original remote
control matches exactly the one of your 10-in-1 remote
control. But this only very rarely the case. This means that if
you are unable to use all functions of your original remote
control, it does not mean there is a fault with your 10-in-1
remote control.

Trademark and brand information

All brand and/or product names mentioned in these operating
instructions and in the device code list are property of their respective
owners and are used for product description and identification purposes
only.
Close the
SilverCrest SFB 10.1 C3
battery
English - 9