Automatic Code Search (Auto Srch) - Silvercrest IAN 274301 Bedienungsanleitung Und Serviceinformationen

SilverCrest SFB 10.1 C3

Automatic code search (AUTO SRCH)

1. Press and hold the
2. Press
3. Press the device button for the device you wish to program. Then
press . The remote control starts sending all available codes. This
is indicated by a flashing
By default the remote control sends the code for the
If no code is assigned to the
send for the different devices:

TV:
the remote control sends the code "CH+".

DVD/CD/VCR:
the remote control sends the code "PLAY".

DSAT/CBL:
the remote control sends the code "CH+".

AMP:
the remote control sends the code "MUTE".

Other devices:
the remote control sends the code "CH+".
4. If your device responds to the sent code by powering on or off or by
executing one of the above functions, press
search. At this point you are close to the correct code, but you may
not yet have found the one that matches completely, as the
automatic search had been stopped with a slight delay and further
codes have been sent.
During the automatic search, the remote control responds to the
and
current code and return to the start window.
5. After you have pressed the
press the
manually. If your device responds again to a code, you have found
a suitable code. Press
are saved and the display reads "SUCCESS".
6. Or press
codes.
7. After the remote control has finished transmitting the last available
code from the code list, the search will stop and after a few seconds
the start window appears.
Press to go back one menu level. To return to the start window,
press one of the device buttons.
18 - English
button for 3 seconds.
, select "CODE SETUP" and then press
and select "AUTO SRCH". Press
IR icon on the display.
buttons only. You can press the
buttons to send the previous or next codes
to exit the automatic search. The codes
to exit the automatic search. This will not save any
button, the following codes will be
button to stop searching you can
. Press
.
button.
to stop the
button to save the
,