Optional Accessories - Makita BUC250 Betriebsanleitung

OPTIONAL ACCESSORIES

CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Makita genuine battery and charger
• Saw chain
• Scabbard
• Guide bar complete
• File
• Tool bag
• Battery adapter
• Arm cord hook (to be used together with the battery
adapter)
NOTE:
• Some items in the list may be included in the tool pack-
age as standard accessories. They may differ from
country to country.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3.0 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model BUC250, UC250D
Work mode: cutting wood
Vibration emission (a
Uncertainty (K): 1.6 m/s
Model BUC300, UC300D
Work mode: cutting wood
Vibration emission (a
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been mea-
sured in accordance with the standard test method and
may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the oper-
ator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
26
): 87.3 dB (A)
pA
): 95.3 dB (A)
WA
2
): 7.0 m/s
h
2
2
): 6.3 m/s
h
2
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Chain Saw
Model No./ Type: BUC250, UC250D, BUC300, UC300D
Specifications: see "SPECIFICATIONS" table.
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN ISO 11681-2
The EC-Type Examination Certificate No. 4814056.14001
The EC-Type Examination per 2006/42/EC was per-
formed by:
DEKRA Testing and Certification GmbH
Enderstraße 92b
01277 Dresden
Germany
Identification No. 2140
The technical file in accordance with 2006/42/EC is avail-
able from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
ENG905-1
The conformity assessment procedure required by Direc-
tive 2000/14/EC was in Accordance with annex V
Measured Sound Power Level: 95.2 dB (A)
Guaranteed Sound Power Level: 98.0 dB (A)
ENG900-1
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
ENG901-1
31.8.2014
Yasushi Fukaya
Director
ENH030-5