Optional Accessories - Makita DUC256 Betriebsanleitung

Chain does not stop even the chain brake
is activated:
Stop the machine immediately!
Abnormal vibration:
Stop the machine immediately!
The Torque Boost mode is not available
after replacing the battery cartridge with a
fully charged one.
The saw chain cannot be installed.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
accessory or
stated purpose.
If you need any assistance for more details
regarding these accessories, ask your local Makita
Service Center.
•
Saw chain
•
Guide
•
Guide
•
Sprocket
•
File
•
Makita
charger
WARNING:
If you purchase a guide bar of
different length from the standard guide bar, also
purchase a suitable guide bar cover together. It
must fit and fully cover the guide bar on the chain
saw.
NOTE: Some items in the list may be included in
the tool package as standard accessories. They
may differ from country to country.
The brake band is worn down.
Loose guide bar or saw chain.
Tool malfunction.
Depending on the usage conditions, the
Torque Boost mode is not available after
replacing the battery cartridge.
The combination of saw chain and
sprocket is not correct.
persons. Only
attachment for its
bar
bar cover
genuine battery and
use
24 ENGLISH
Ask the authorized service center in your
region for repair.
Adjust the guide
and saw
chain tension.
Ask the authorized service center in your
region for repair.
Use the tool in the normal mode until the
installed battery cartridge becomes empty,
and then replace the battery cartridge with
a fully charged one, or recharge the battery
cartridge.
Use the correct combination of saw chain
and sprocket by referring to the section for
specifications.
bar