Other Functions; Problem Solving; Cleaning And Storage - RUSTA 90651074 Gebrauchsanweisung

ENG
USE
• Put the patio heater on a flat and stable surface at least 1 metre from the wall and
flammable objects.
• The control dial must be set to 0 when you connect the patio heater to the power
supply.
• Set the control dial to either heat setting 1 (600W) or heat setting 2 (1200W).
• Set the control dial to
will rotate at 60°C at heat setting 2.
• Set the control dial to 0 to switch the patio heater off. Pull the plug out of the
socket.

OTHER FUNCTIONS

• The patio heater is equipped with anti-tip protection that automatically switches
the patio heater off if it is not in a vertical position.
• The patio heater will only start again when it is put in the vertical position.
• IMPORTANT! The patio heater may only be used outdoors and only when the
weather is dry. It must not be left unattended. It must be connected to an earthed
electric socket.
PROBLEM-SOLVING
• Check that the plug is in the socket and check the power supply to the plug.
• Remove all objects from around the patio heater or in the grating. Switch the patio
heater off, unplug it and let it cool down. Remove any objects that are in the way,
put the plug back into the socket and start the heater again.
• If the problem persists, unplug the heater and contact an authorised workshop.

CLEANING AND STORAGE

• You need to clean the patio heater once a month and before you store it away.
• Switch the patio heater off, unplug it and let it cool down. Use a dry cloth to clean
the casing.
• Do NOT use water, wax, polish or other cleaning agents.
4
to activate the oscillating function. The patio heater