Network Requirements; Network Configuration; Connecting To A Power Supply; Using The Device For The First Time - Medion LIFE P85035 Bedienungsanleitung

8.1. Network requirements

The network must meet the following requirements for the device to function as a
WiFi radio:
• The router used for the network must have a DHCP server function so it can au-
tomatically assign a network IP address to the device.
• If your router is configured in this way, you can connect your WiFi radio to the
network without further action.
9. Network confi guration
Two network configurations are possible for the Internet radio: WiFi mode (wireless)
or LAN mode (with an Ethernet cable).
• If the Internet connection is to be established using an Ethernet cable, go to the
setup wizard and select the connection type CABLE. You can manually change
all settings later in the system settings.
• If you have a wireless 802.11 a/b/g/n network, you can connect the Internet ra-
dio to the Internet via WiFi:
If the device is being used for the first time, you will need to select an access
point (AP) and possibly enter the network key. The radio will then always access
this AP automatically. A message will appear if the device is unable to find the
AP.

10. Connecting to a power supply

 Connect the power plug of the supplied adapter (model number KSASB-
0241200150HE) to the DC IN socket on the device.
 To turn on the power, switch on the radio using the On/Off switch at the back.
11. Using the device for the fi rst time
• When using for the first time, you will initially see a selection where you can set
the menu language.
 Select the language in which the menus are to be displayed and then press the
OK rotary dial to confirm.
The setup wizard appears (in the previously selected language):
 Confirm the query SETUP WIZARD. START NOW? with YESto start
the setup wizard.
Einrichtungsass.
Jetzt ausführen?
JA
NEIN
DE
EN
TR
67 of 142