3.2. Power supply
DANGER!
Risk of electric shock!
Risk of injury from electric shock due to live parts.
Connect the mains adapter only to an easily accessible and
correctly installed safety socket (AC 100 – 240 V ~ 50/60 Hz)
that is close to the place where you have set up the device. Al-
ways keep the power socket free of obstructions so that the
plug can be pulled out easily.
Even when the mains switch is off, some components of the de-
vice are live.
In order to disconnect the power to your device or to com-
pletely isolate the device from voltage sources, remove the
mains plug from the mains socket.
When disconnecting the product from the mains supply, al-
ways pull on the plug rather than on the cable.
Mains adapter
Only use the supplied mains adapter
(model KSASB0241200150HE).
If the housing of the mains adapter or the power cable is
damaged, the mains adapter must be disposed of and re-
placed with a new mains adapter of the same type.
The mains adapter may only be used in dry rooms.
3.3. Place of installation and surroundings
DANGER!
Risk of electric shock!
Major changes in temperature or fluctuations in humid-
ity can cause moisture to build up within the product
due to condensation – this can cause an electrical short
circuit.
After transporting the device, wait until it has
reached ambient temperature before switching it on.
56 of 142