Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.7. LED Diode-Test (
1.) Choose with the rotary switch the corresponding measuring
range "Rx10".
2.) Connect the black test lead to the "COM" jack and the red test
lead to the "V//mA" socket.
3.) Before measuring short both test leads to check the zero
point. If the pointer does not move to 0, set the adjustment
knob (2) and set to zero.
4.) Connect the test leads of the instrument parallel to the LED
diode to be measured.
5.) If LED is lit, the pointer indicates the current value in the
forward direction (LI) and the voltage value in the forward
direction (LV).
)
-34-
Werbung
