Proper Use; Safety Devices; Environmental Protection; Before Startup - Kärcher MC 50 Bedienungsanleitung

Switch off the appliance and, in case of
–
appliances connected to the mains, pull
out the power cord before cleaning and
performing any maintenance tasks on
the machine.
Maintenance work may only be carried
–
out by approved customer service out-
lets or experts in this field who are famil-
iar with the respective safety
regulations.
Mobile industrial apliances are subject
–
to safety inspections according to the
local regulations (for e.g. the following
are applicable in Germany: VDE 0701).

Proper use

Use this high pressure cleaner exclusively
for
For cleaning using high pressure jet
–
without detergent (for e.g. for cleaning
facades, park benches, garden paths).
This high pressure cleaner is intended for
the exclusive use with the sweeping vacu-
um cleaner MC 50.
The high pressure cleaner must only be
used with the included flat spray nozzle.

Safety Devices

Safety devices serve for the protection of
the user and must not be put out of opera-
tion or bypassed with respect to their func-
tion.
Overflow valve
While reducing the water supply/quantity
regulation at the pump head, the overflow
valve opens and part of the water flows
back to the pump suck side.
Safety valve
The safety valve opens when the permissi-
ble operating pressure is exceeded; water
flows back to the suction side of the pump.
The overflow valve and safety valve are set
and sealed at the factory.
Setting only by customer service.

Environmental protection

The packaging material can be
recycled. Please do not place
the packaging into the ordinary
refuse for disposal, but ar-
range for the proper recycling.
Old appliances contain valua-
ble materials that can be recy-
cled. Please arrange for the
proper recycling of old appli-
ances. Batteries, oil, and simi-
lar substances must not enter
the environment. Please dis-
pose of your old appliances us-
ing appropriate collection
systems.
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
http://www.karcher.de/de/unternehmen/
umweltschutz/REACH.htm

Before Startup

Check the contents of the pack before
–
unpacking.
In case of transport damage inform ven-
–
dor immediately
Check oil level
Read the oil level display when the de-
vice is not running. The oil level must be
above the two pointers.
Activate deaeration of oil container
Cut off tip of oil container cover
Attaching the Accessories
Install nozzle with nozzle screw at the
spray pipe.
Install spray pipe on the hand-spray
gun.
Before rolling up, stretch out the high
pressure hose.
– 3
EN
Unpacking
13