Werbung
Verfügbare Sprachen
Verfügbare Sprachen
"FRESCO 3000" CAN BE USED BY ACTIVATING THE AIR CONDITIONING OR THE FAN
FUNCTION ONLY.
T 0 : TEMPERATURE SET BY USER
T amb : AMBIENT TEMPERATURE DETECTED BY PROBE
V 1 : COMPRESSOR ROTATION SPEED (2500 Rpm)
V 2 : COMPRESSOR ROTATION SPEED (4000 Rpm)
The basic operating principles of the central control unit are:
About 30" after switching on, the ventilation starts up automatically.
The AC system can run for a maximum of 6 hours.
The display always shows the temperature set by the user (T 0 ).
The temperature which can be set by the user is between 17°C and 28°C.
ON / OFF - TIMER BUTTON OPERATION
ON / OFF function:
When the system is switched off, pressing down this button for more than 2 seconds,
switches on the AC system.
If the system is switched on, pressing down this button for more than 2 seconds, switches off
the AC system.
Timer function:
If the system is switched on, every time the TIMER button is pressed quickly, the system
operation time is reduced by 1 hour.
MAX AC BUTTON OPERATION (offers maximum performance by the system)
When the system is running, (by default in mode V
rotation speed V
of the compressor for 4 consecutive hours and the whole snowflake
2
symbol will light up on the display (despite being usually only half lit at speed V
Once this function has been activated, press the MAX AC button again to return to speed V
By pressing the TIMER button with MAX AC engaged, the compressor running time at speed
V
may diminish from 4 to 1 with steps of 1 hour.
2
7/18
CONDITIONING (AC)
) press the MAX AC button to start
1
).
1
1.
GB
Werbung
