Scope Of Supply; Safety Devices; Use According To Intended Purpose; Residual Risks - Mafell ZK 115 Ec Originalbetriebsanleitung

2.6 Scope of supply

Carpentry bird's mouth cutter ZK 115 Ec complete with:
1 parallel stop
1 bird's mouth cutter head Ø 150 x 115 mm (5 29/32 x 4 17/32 in.)
1 parallel stop
1 hex screwdriver
1 screwdriver Torx T 15
1 operating manual
1 folder "Safety Instructions"

2.7 Safety devices

Danger
These devices are required for the
machine's safe operation and may
not be removed or rendered
inoperative.
The machine is equipped with the following safety
devices:
- Upper stationary saw guard
- Lower retractable saw guard
- Upper retractable saw guard
- Large base plate
- Handles
- Index mechanism and brake

2.8 Use according to intended purpose

The MAFELL ZK 115 Ec carpentry bird's mouth cutter
is designed exclusively for working with wood.
For manual feeding use only tools that bear the MAN
and, if applicable, the BG test label.
The dimensioning of the cutting and flattening heads
used must correspond to the tools listed in this
operating manual.
The tool was manufactured in accordance with the
European norm EN 847-1.
Any other use than described above is not
permissible. The manufacturer cannot be held liable
for any damage arising from such other use.
So as to use the machine as intended, comply with
the operating, maintenance and repair instructions
specified by Mafell.

2.9 Residual risks

Danger
Even if used in accordance with its
intended purpose and despite
conforming with the safety
instructions, residual risks caused
by the intended use will always
remain.
- Touching the cutter head in the area of the start-up
opening.
- Touching the part of the cutter head that protrudes
below the workpiece when cutting.
- Machine backlash if the blade gets stuck in the
workpiece.
- Breakage and hurling out of the tool or parts of the
tool.
- Touching live parts with the housing open and the
mains plug not removed.
- Hearing can be impaired when working for long
periods without ear protectors.
- Emission of hazardous wood dust when operating
the machine for longer periods of time without
extraction.
3

Safety instructions

Danger
Always observe the following safety
instructions and the safety
regulations applicable in the
respective country of use!
-18-