Technical Data; Noise Emission Specifications; Vibration Specifications - Mafell ZK 115 Ec Originalbetriebsanleitung

2.3 Technical data

Universal motor, radio and TV
interference suppressed
Power input (nominal load)
Current at nominal load
Speed of the output shaft when idle
Speed of the output shaft with nominal
load
Can be pivoted from
Depth adjustment
Working tool
for bird's mouths:
for flattening:
Weight
Cutting speed with nominal load:

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1:
Idling
Machining
The noise measurements were made with the standard cutter head included in delivery.
Workpiece: Spruce 140 x 140 x 2000 mm; Cutting depth: 20 mm; Guide without stop
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm vibration is 4.0 m/s
Cutter head Ø 150 x 115 mm
(5 29/32 x 4 17/32 in.)
Cutter head Ø 236 x 50 mm (9
29/100 x 1 97/100 in.)
Cutter head Ø 190 x 80 mm (7
31/64 x 3 5/32 in.)
Machine with
stop without cutter head and
power cord
Cutter head Ø 150 x 115 mm
Cutter head Ø 236 x 50 mm
Cutter head Ø 190 x 80 mm
Cutter head Ø 150 x 115 mm
Cutter head Ø 236 x 50 mm
Cutter head Ø 190 x 80 mm
Sound power level
108 dB (A)
109 dB (A)
2 .
Workplace-related emission value
97 dB (A)
98 dB (A)
-17-
230 V~, 50
120 V~, 60
Hz
Hz
3000 W
2500 W
15,5 A 23,5 A
4050 rpm
4050 rpm
0 – 60°
0 - 83.5 mm (0- 3 29/100 in.)
n = 5000 rpm
max.
n = 5000 rpm
max.
n = 5000 rpm
max.
21,1 kg (46.5 lbs)
3.0 kg (6.6 lbs)
3.5 kg (7.7 lbs)
5.9 kg (13 lbs)
31.8 m/s (104 ft/sec.)
50.0 m/s (164 ft/sec.)
40.3 m/s (112 ft/sec.)