Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell KFU 1000 E Originalbetriebsanleitung

2.3 Technical data

Cutting depth
Cutting blade diameter
Cutting blade bore
Cutting blade speed
Cutting speed
Operating weight
Dimensions (W x L x H)
Universal motor, radio and TV interference suppressed
Power input (continuous operation)

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1:
Leerlauf
The stated values do not take any series variance into account and are not suitable for determining the
evaluation level according to German UVV «noise» regulations since this varies depending on the operating
time, the machining operation concerned and environmental factors. The evaluation level can consequently be
determined only in the individual instance on the premises of the machine user.

2.5 Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s

2.6 Scope of supply

Grooving machine KFU 1000 E complete with:
1 TCT groove-cutting blade Ø 120 x 3.6 x 20 mm (423/32 x 1/8 in. x 20 mm), 12 teeth
1 bow for chip bag
1 chip bag
1 chip bag holder
1 service tool
1 carrying case with tray
1 operating manual
1 folder "Safety Instructions"

2.7 Use according to intended purpose

The MAFELL grooving machine KFU 1000 E is
intended exclusively for cutting grooves for plastic
welding material into floor covering materials which
will melt when being heated (PVC and similar
material).
The diameter of the groove-cutting blades used must
be 120 mm (4 23/32 in.).
Any other use beyond this scope is considered as
failing to comply with the intended purpose.
Sound power level
104 dB (A)
2 .
0 - 4,5 mm (0 – 11/64 in.)
120 mm (4 23/32. in.)
20 mm (1 ¼ in.)
8000 - 13000 rpm
50 – 82 m/s (164 – 279 ft/sec.)
3,8 kg (8.3 lbs)
206 x 218 x 216 mm
230 V~, 50 Hz or 110 V~, 50 Hz
900 W
Workplace-related emission value
93 dB (A)
The manufacturer is not liable for any damage
caused as a result of this; the risk is borne solely by
the user.
Use according to intended purpose also includes
compliance with the operating, maintenance and
repair conditions specified by MAFELL, and
adherence to the safety instructions contained in the
operating manual.
The grooving machine KFU 1000 E must be
operated, tooled and maintained only by persons
-14-