Technical Data - Migatronic Sigma Next Rc Betriebsanleitung

Technical data

POWER SOURCE
Mains voltage ±15% (50-60Hz), V
Minimum generator size, kVA
Fuse, A
Mains current, effective, A
Mains current, max., A
Power, 100%, kVA
Power, max., kVA
Power, open circuit, VA
Efficiency
Power factor
Current range, A
Duty cycle, 100% 20°C (MIG), A/V
Duty cycle, 60% 20°C (MIG), A/V
Duty cycle, max. 20°C (MIG), A/%/V
Duty cycle, 100% 40°C (MIG), A/V
Duty cycle, 60% 40°C (MIG), A/V
Duty cycle, max. 40°C (MIG), A/%/V
Open circuit voltage, V
1) Sphere of application
Protection class
2)
Standards
Dimensions (HxWxL), mm
Weight, kg
FUNCTION
Selection of trigger mode, 2-times / 4-times
Control of current/voltage/ wire feed speed
Wire inching
Torch cooling
Gas pre-flow, sec.
Soft-start, m/min
Hot-start, %
Hot-start-time, sec.
Slope down time, sec.
Stop Amp, A
Stop Amp time, sec.
Gas post-flow, sec
Sequence timer / Spot welding time, sec.
DUO Plus™ efficiency, %
DUO Plus™ time, sec.
Electronic choke
1) This machine meets the demand made for machines which are to operate in areas with increased hazard of electric chocks.
2) Equipment marked IP23S is designed for indoor and outdoor applications.
SIGMA NEXT RC
3x400
27
20
16
24.5
11.7
18.2
30
0.88
0.92
15-400
350/31.5
400/34.0
300/29.0
370/32.5
400/50/34
70
S/CE
IP23S
EN/IEC60974-1.
EN/IEC60974-10.
520x260x635
35
PROCESS VALUE RANGE
MIG/MAG 2/4
remote control
MIG/MAG no
air cooled
MIG/MAG 0.0-10.0
MIG/MAG 0.5-24.0
Synergic -99 - 99
Synergic 0-20
Synergic 0-10
Synergic 0-100
Synergic 0-10
MIG/MAG 0.0-20.0
MIG/MAG 0.0-50.0
MIG/MAG 0-50
MIG/MAG 0.1-9.9
-5.0 - +5.0
EC DECLARATION OF CONFORMITY
MIGATRONIC A/S
Aggersundvej 33
9690 Fjerritslev
Denmark
hereby declare that our machine as stated below
Type: SIGMA NEXT RC
conforms to directives: 2014/35/EU
2014/30/EU
2011/65/EU
European standards: EN/IEC60974-1
EN/IEC60974-10 (Class A)
Issued in Fjerritslev 17.05.2017
Niels Jørn Jakobsen
CEO
25