eMitter Basic Bedienungsanleitung Seite 46

Illustration Explanation
Keep your pressure on the bridge while simultaneously ten-
sioning the fixed snap traps with the forefinger of your other
hand until they click into place.
As soon as both snap traps are adjusted you can remove your
hands. The bridge will now be held down by both snap traps.
As soon as one trap snaps the rocker switch of the transmitter
will speed up and you will receive a message.
Now carefully close the tunnel by pressing both pressure
points (see image) and it will smoothly click into place.
Place the tunnel directly at the wall, so no rodent can move
between the trap and the wall.
Much success with eMitter and Speed-Break by FuturA.
47