eMitter Basic Bedienungsanleitung Seite 44

Abbildung Explanation
To reactivate the trap after a catch, just tense the snap trap
with one finger until it firmly "clicks into place".
Please note: this procedure is only possible horizontally, it is
not possible to reactivate your snap trap vertically.
After tensioning the trap, reactivate the transmitter. Just click
the arm of the transmitter in the direction of the snap trap
until it "clicks into place".
Now the SWOPBOX is active again. When it catches another
rodent, it will push the arm to the side and you will get another
message.
Now please slide the BOX onto the wall-mount so the eMitter
Logo is parallel to the floor. Then rotate it anticlockwise until
it smoothly clicks into place and is safe for use again.
Much success with eMitter and SWOPBOX by FuturA.
45