Programmierung Von Nicht Mehr Benötigten Fallen Löschen - Emitter Basic Bedienungsanleitung

2.4.2 Programmierung von nicht mehr benötigten Fallen löschen
Step Activity
Activating delete function
1
Press the
keep it pressed until the yellow LED flashes.
Display stays blank.
2 Select number
By using the arrows select the trap you
would like to delete.
3 Deleting trap
Press the
4 Deletion ok?
When the deletion is successful the device
shows the following response:
• Display shows „CL" (= „clear").
• The yellow LED lights up.
34
-key (see fig. 1, Pos. 8) and
-key.
Explanation / Illustration
–