Exit Programming Mode - Emitter Basic Bedienungsanleitung

Step Activity
Further programming?
5
Repeat steps 2 - 4 for each additional trap
you would like to program.
Please note that the programming mode
only stays activated if an entry is made
within 30 seconds.
6

Exit Programming mode

Press the
until the programming mode is terminated
automatically.
7 Check Programming
Check the status of the programmed traps
one after the other
• activated
• not activated.
Check the correct indication of the LEDs.
30
-key or wait for 30 seconds
Explanation / Illustration
–
–
–