eMitter Basic Bedienungsanleitung Seite 24

Status indication Meaning
Memory full
Up to 128 traps can be programmed on up to 99
memory slots.
At a further programming attempt
• the message „FU" (= „full" – full memory)
and
• all three LEDs are lit.
Deleting OK
If deleting is successful the device shows the following
response:
• The display shows „CL" (= clear").
• The yellow LED lights up for 4 seconds.
Programming mode active
If programming mode is active the device shows the
following response:
• The display shows „1"for the first memory slot.
• The green LED flashes.
25