Status Indication At The Emitter Display - Emitter Basic Bedienungsanleitung

1.1 Status indication at the eMitter Display

This chapter gives an overview of the possible status indications and their meaning.
Status indication
24
Meaning
Program version
When commissioning the device or after every
interruption of the power supply the display shows
the program version of your system (e.g. P1).
Memory empty / Reset
After deleting all programmed traps
• the display shows „00" and
• all 3 LEDs light up.
Programming OK
If programming is successful the device shows the
following response:
• The display shows „SA" (= „safe").
• The green LED lights up for 4 seconds.