Deletion Of Programming Of Single Traps - Emitter Basic Bedienungsanleitung

2.4.1 Deletion of programming of single traps

Step Activity
1 Activating delete function
Press the
keep it pressed until the yellow LED flashes.
Display stays blank.
2 Deleting traps
Trigger the trap within 5 s manually and
set again.
3 Deletion ok?
When the deletion was successful the
device shows the following response:
• The display shows „CL" (= „clear").
• The yellow LED lights up.
4 Deletion of further radio transmitters
In order to delete further traps in each case
the delete function has to be terminated:
Press the
device switches to standard mode.
Repeat steps 1 to 4 for each further trap to
be deleted.
-key (see fig. 1, Pos. 8) and
-key and keep it pressed until
Explanation / Illustration
–
–
33