Traps After A Power Failure - Emitter Basic Bedienungsanleitung

2.3 Traps after a power failure

After a power failure or an interruption of power supply for more than 30 seconds the traps
have to be updated (but not reprogrammed).
Step Activity
Indication of not updated traps
The red LED flashes and every 2 seconds
all traps which are no longer connected are
shown in the display.
1 Deactivating programming mode
Press the
The programming mode is terminated and
the device switches to standard mode:
If the programming is successful the green
LED lights up if all traps are set.
The red LED lights up if one or more traps
were triggered.
2 Check update
-key.
Explanation / Illustration
–
Update completed?
31