Programming Traps - Emitter Basic Bedienungsanleitung

2.2 Programming traps

Step Activity
1 Activating programming mode
2 Select number
By pressing one of the arrow keys (see
Fig. 1, Pos. 6 and 7) set the number under
which you would like to program the first
ready trap.
3 Programming traps
Triggering of trap manually within
5 seconds and set again.
4 Programming ok?
If programming is successful the device
shows the following response:
• The display shows „SA" (= „safe").
• The green LED lights up for 4 seconds.
Afterwards the trap has been filed and
saved.
Explanation / Illustration
–
29