Joie i-Anchor Advance Bedienungsanleitung Seite 8

!
There are 9 adjustable positions
for ISOFIX. Press the ISOFIX
release button and push the
i-anchor advance base back against
the vehicle seat until tight.
!
Make sure that both ISOFIX
connectors are securely attached to
their ISOFIX anchor points. The
colors of the indicators on both
ISOFIX connectors should be
completely green. -1
8
13
6
1
7
1
2
8
1
!
Please consider that base MUST
be connected via ISOFIX to the
car. Attachment of base only with
car seat belt is not permitted
according to ECE R129. For a safer
drive of your child you are free to
decide on whether to install the
base with or without car seat belt
in addition to ISOFIX attachment .
!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points. -1
9
!
The load leg must be installed
correctly with green indicator.
Please refer to baby mode and
toddler mode in section to use the
i-anchor advance.
!
The ISOFIX is folded completely.
9
1
10
9 -2
2 1
11
11
2
2
1
14