Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Securing your Child in the i-anchor Advance
Forward Facing
Note
1. When installing the i-anchor advance in the toddler mode, do not
use the infant insert.
2. Please install the i-Base
install the shell, and then put the child in the i-anchor advance.
3. After the child is placed into the i-anchor advance seat, check
whether the shoulder harnesses are at proper height.
1. Press the webbing adjustment
button, while pulling out the
shoulder harnesses to the proper
length.
2. Press the red button to disengage
the buckle.
3. Fix the buckles on the both sides
of seat to make placing the forward
facing more convenient.
26
21
Advance on the vehicle seat, then
TM
26
4. Place the child into the i-anchor
advance and engage the buckle.
!
After the child is seated, re-check
whether the shoulder harnesses
are at the proper height.
5. Engage the buckle.
6. Pull down the adjustment webbing
and adjust it to the proper length
to make sure your child is snugly
secured.
27
!
Make sure the space between the
child and the shoulder harness
is about the thickness of one
hand.
!
To release the i-anchor advance
seat, taking the child out of the
i-anchor advance seat, lift the
i-anchor advance seat up while
squeezing the child restraint
release button.
27
27
22
Werbung
Inhaltsverzeichnis
