Joie i-Anchor Advance Bedienungsanleitung Seite 11

7. Pull down the adjustment webbing
and adjust it to the proper length
to make sure your child is snugly
secured.
22
!
Make sure the space
between the child and the
shoulder harness is about the
thickness of one hand.
!
To release the i-anchor advance
seat, taking the child out of the
i-anchor advance seat, lift the
i-anchor advance seat up
while squeezing the child
restraint release button.
Toddler Mode (Forward Facing Mode)
Forward Facing Child height 80cm-105cm/Child weight 18.5kg;
Recline position Position 1-7
!
Please install the i-base Advance on the vehicle seat (with rebound
bar attached), then install the shell, and then put the child in the
i-anchor advance.
!
Ensure rebound bar is fitted to i-Base
!
The most convenient way to install the shell is when the i-Base
th
Advance is in the 7 position.
19
22
23
-2
23
-1
23
1
Advance.
TM
If the i-anchor advance is secure, the
child restraint latched indicator shows
green. If the i-anchor advance is not
2
secure, the latched indicator shows
red. -1
25
!
Pull up on the i-anchor advance
seat to make sure it is securely
latched into the base.
!
Please ensure that there is no gap
between the vehicle seat and
the bottom of the i-Base
Advance.
TM
24
25
1
TM
20