Intended Use - Conrad 75 17 50 Bedienungsanleitung

2. Intended Use

The range of use of this surveillance camera covers video surveillance. It has been
designed to observe and secure obstructed or critical areas (surveillance of shops
or entrance areas).
The surveillance camera was designed for connection to the video input of a PAL
TV or video recorder.
The optional mounting base can be used to attach the camera to a wall
The included auto iris objective uses a DC control signal. At the objective, focal
width (3.5-8.0 mm) and sharpness can be manually adjusted to display an ideal
image section at the screen.
Adapters for C or CS objectives included.
The surveillance camera with objective is only suitable for dry indoor use.
The power supply requited is 230 V/AC 50 Hz For this, the camera has a connection
cable with a safety plug.
Please note that you incur a penalty if you observe strangers with this camera with-
out their knowledge and consent.
Any use other than the intended use described above is not permitted and may
harm the product and result in short circuits, fire, electric shocks etc. The product
must not be modified or converted. Always observe the safety instructions included
in these operating instructions. Please read the operating instructions carefully and
keep them for later reference.
20