Connection Options (Input Signals); Vga Connection (Computer); Av-Video Connection - Santec SLS-1900 Bedienungsanleitung

2. Connection options (input signals)

To call-up the source menu, please proceed as follows:
Source menu:
Note:
A picture is only displayed if you have selected the appropriate video input.

2.1 VGA connection (computer)

You can connect a computer to the monitor. Use a 15-pin monitor cable and connect it to the
monitor's VGA socket and the computer's video output. If the video output of your computer
doesn't have 15 pins, please use a suitable adapter.
Connecting an audio cable:
For sound, please use a 3,5 mm stereo mini-pin cable and connect it to the monitor's audio
socket and tot he computer's audio output.
Picture display on your computer:
In order to display the monitor picture on your computer, connect the monitor to the computer
and switch both devices on. Then press the "Source" key on the remote control (or on the
monitor) until "VGA" is displayed. Press the "Source" key again to return to the monitor
picture.
2.2 AV video connection
Here you can connect a device with a video output, e.g. a camera or a recorder.
In the „Source" menu, select „AV1" or „AV2".
_________________________________________________________________________________
Using the remote control:
Press the source key to call-up the source menu.
Press the up/down keys to go to a menu item.
Press the right key to confirm your selection.
Using the keys on the monitor:
Press the source key to call-up the source menu.
Press the source key again to go to a menu item.
Press the + key to confirm your selection.
- 38 -
Bedienungsanleitung / User Manual
SLS-1900, SLS-2150, SLS-3200